View Solutions
Products
Your Single Source Partner for All Your Valve, Valve Actuation and Pressure Relief Needs
Outstanding Quality Products, Lowest Cost of Ownership
Offering a diverse portfolio with an emphasis on providing a lower true cost of ownership that extends well beyond the initial purchase price. Valves and Controls to include manual, on-off, modulating control, automated (including pneumatic, electric & hydraulic), quarter turn & multi-turn, local & remote control with indication.
All environments including: Submersible, Explosion Proof, Dust and Extreme Heat & Cold
Available in Sizes 2” through 72” Stocking in Sizes 2” through 36” Wafer / Lug / Double Flange / Butt-weld Style Pressure Class: 150 / 300 / 600 ...
Available in Sizes 2” through 12” Wafer and Lug Style Pressure Rated @ 230 psi ...
Available in Sizes 2” through 48” Stocking in Sizes 2” through 36” Wafer and Lug Style Pressure Rated @ 200 psi for 2” thru 12” and 150 psi for 14” and up ...
Available in Sizes 2” through 72” Stocking in Sizes 2” through 36” Wafer and Lug Style Pressure Rated @ 230 psi for 2” thru 12” and 150 psi for 14” and up ...
The Series 39F Large-Diameter Slurry Check Valve is designed to handle abrasive slurries, sewage, sludge and other difficult services. The valve’s operation is silent and non-slamming, just like the smaller Series 39. At the heart of the Series 39F Check Valve is a fabric-reinforced, elastomer check sleeve that provides through flow at minimum pressure drop across the valve at all times. Forward pressure opens the valve automatically and reverse pressure seals...
The Series 37 Inline Check Valve is a simple, reliable, cost-effective solution for backflow prevention. The revolutionary design of the 37 is similar to the Series 35, but the Series 37 bill does not flare and is designed to be inserted into the downstream pipe and fastened between two mating flanges, eliminating the need for a valve body. Since most of the valve is inserted into the downstream pipe the...
The Series 39 Slurry Check Valve is designed to handle abrasive slurries, sewage, sludge and other difficult services. At the heart of the Series 39 Check Valve is a fabric-reinforced elastomer check sleeve that provides thru-flow at minimum pressure drop across the valve at all times. Forward pressure opens the valve automatically, reverse pressure seals the valve. The check sleeve even seals around entrapped solids. This inner rubber duckbill check valve...
The TF-2 was the first duckbill check valve introduced by Tideflex Technologies. The TF-2 was developed based on a United States Environmental Protection Agency (EPA) grant in the 1980s to overcome excessive costs in maintenance and replacement of non-performing flapgates. The TF-2 design has been enhanced by the TF-1 Flat-bottom Duckbill Check Valve. The TF-1 requires minimal bottom clearance and the inherent geometry and construction of the TF-1 yields a...
The TF-1 has become the preferred Tideflex Check Valve configuration for outfalls. Designed for in-structure and end-of-pipe installations, the TF-1 features a flat bottom and flared top. This allows the valve to be installed at a lower overall elevation than other configurations, with less bottom clearance required. This is especially important in low-lying areas where maintaining as much driving head is critical, or where silt, sand and debris might tend...
Red Valve Control Pinch Valves offer maximum durability with precise control and virtually no maintenance. A heavy-duty, rugged pinch mechanism positions the sleeve, resulting in accurate flow control. Our Control Pinch Valves have no packing to maintain or seats to wear, no fugitive emissions and no need for expensive body alloys. Variable orifice and cone sleeves can be specified to further enhance control performance and match the exact CV level...
